side
Customer Feedback
All seems to be running well, no problems. Replacement pump was needed, we had it in 2 days. Repaired our pump in 1 week. Fast service, fast problem solving, great customer service
A. Giuliani

Single Stage End-Suction Centrifugal Pumps

///Single Stage End-Suction Centrifugal Pumps

  • TCH

    Capacity USGPM                 : 5-320
    Max.Pressure Head-Feet   : 12-365
    HP / Speed Motor               : 0.5-6/1750-3500


  • Placeholder

    Capacity USGPM                 : 15-48
    Max.Pressure Head-Feet   : 30-305
    HP / Speed Motor               : 1-15/1750-3500


  • Placeholder

    Capacity USGPM                 : 24-105
    Max.Pressure Head-Feet   : 20-200
    HP / Speed Motor               : 1-10/1750-3500


  • Placeholder

    Capacity USGPM                 : 30-160
    Max.Pressure Head-Feet   : 60-475
    HP / Speed Motor               : 2-20/1750-3500


  • Placeholder

    Capacity USGPM                 : 60-210
    Max.Pressure Head-Feet   : 15-200
    HP / Speed Motor               : 1.5-15/1750-3500


  • Placeholder

    Capacity USGPM                 : 50-250
    Max.Pressure Head-Feet   : 40-480
    HP / Speed Motor               : 2-50/1750-3500


  • Placeholder

    Capacity USGPM                 : 60-400
    Max.Pressure Head-Feet   : 15-200
    HP / Speed Motor               : 1-25/1750-3500


  • Placeholder

    Capacity USGPM                 : 60-420
    Max.Pressure Head-Feet   : 30-470
    HP / Speed Motor               : 5-75/1750-3500


  • Placeholder

    Capacity USGPM                 : 100-750
    Max.Pressure Head-Feet   : 12-200
    HP / Speed Motor               : 2-35/1750-3500


  • Placeholder

    Capacity USGPM                 : 100-720
    Max.Pressure Head-Feet   : 50-460
    HP / Speed Motor               : 10-26/1750-3500


  • Placeholder

    Capacity USGPM                 : 200-1100
    Max.Pressure Head-Feet   : 20-300
    HP / Speed Motor               : 5-85/1750-3500


  • Placeholder

    Capacity USGPM                 : 200-1200
    Max.Pressure Head-Feet   : 60-450
    HP / Speed Motor               : 15-170/1750-3500


  • Single-Stage-End-Suction-Centrifugal-Pumps4

    HEAD : 35 to 450 FT.
    CAPACITY : To 1800 USGPM
    FEATURES : Oversized 316SS shaft to minimize deflection and vibrations for optimal mechanical seal life; positive bearing locking; Oversized bearings to handle both axial and radial loads; Volute cover and bearing housing designed as “Back Pull-Out” assembly for ease of servicing;Generous oil capacity for positive lubrication of the submerged bearings;Magnetic plug to trap metallic impurities from the oil; Corrosion allowance in excess of 3mm; High hydraulic efficiency and low NRSH requiredments; Safety, durability, lower operating NPSH requirements; Safety, durability, lower operating costs; Optional cooling water jacket design.
    SHAFT SEALING : Crane 502 carbon/ SiCar/ Viton single mechanical sealstandard, Other available, inculuding double seals,
    OPTION : Bareshaft – Directly coupled to electric motor mounted on baseplate.
    TEMPERATURE LIMITS : GS $ RA: Min, -20’C; Max. 280’C (Except for water) A3,HC & DU; Min. -40’C; Max. 280’C (Except for water

    MAX DISCHARGE PRESS : 232 PSI (16 bar) to 248’F (120’C) 170 PSI (11 bar) to 536’F(280’C
    FLANGES : UNI 2223-2229 Drilled to ANSI B1 6.5 (Class 150))


  • Single-Stage-End-Suction-Centrifugal-Pumps4

    HEAD                 : 25 to 175 FT.
    CAPACITY             : To 1680 USGPM
    FEATURES             : Oversized 316SS shaft to minimize deflection and vibrations for optimal mechanical seal life; positive bearing locking; Oversized bearings to handle both axial and radial loads; Volute cover and bearing housing designed as “Back Pull-Out” assembly for ease of servicing;Generous oil capacity for positive lubrication of the submerged bearings;Magnetic plug to trap metallic impurities from the oil; Corrosion allowance in excess of 3mm; High hydraulic efficiency and low NRSH requiredments; Safety, durability, lower operating NPSH requirements; Safety, durability, lower operating costs; Optional cooling water jacket design.
    SHAFT SEALING        : Crane 502 carbon/ SiCar/ Viton single mechanical sealstandard, Other available, inculuding double seals,
    OPTION               : Bareshaft – Directly coupled to electric motor mounted on baseplate.
    TEMPERATURE LIMITS   : GS $ RA: Min, -20’C; Max. 280’C (Except for water) A3,HC & DU; Min. -40’C; Max. 280’C (Except for water

    MAX DISCHARGE PRESS  : 232 PSI (16 bar) to 248’F (120’C) 170 PSI (11 bar) to 536’F(280’C
    FLANGES              : UNI 2223-2229 Drilled to ANSI B1 6.5 (Class 150))


  • Single-Stage-End-Suction-Centrifugal-Pumps4

    HEAD : 28 to 280 FT.
    CAPACITY : To 2650 USGPM
    FEATURES : Oversized 316SS shaft to minimize deflection and vibrations for optimal mechanical seal life; positive bearing locking; Oversized bearings to handle both axial and radial loads; Volute cover and bearing housing designed as “Back Pull-Out” assembly for ease of servicing;Generous oil capacity for positive lubrication of the submerged bearings;Magnetic plug to trap metallic impurities from the oil; Corrosion allowance in excess of 3mm; High hydraulic efficiency and low NRSH requiredments; Safety, durability, lower operating NPSH requirements; Safety, durability, lower operating costs; Optional cooling water jacket design.
    SHAFT SEALING : Crane 502 carbon/ SiCar/ Viton single mechanical sealstandard, Other available, inculuding double seals,
    OPTION : Bareshaft – Directly coupled to electric motor mounted on baseplate.
    TEMPERATURE LIMITS : GS $ RA: Min, -20’C; Max. 280’C (Except for water) A3,HC & DU; Min. -40’C; Max. 280’C (Except for water

    MAX DISCHARGE PRESS : 232 PSI (16 bar) to 248’F (120’C) 170 PSI (11 bar) to 536’F(280’C
    FLANGES : UNI 2223-2229 Drilled to ANSI B1 6.5 (Class 150))


  • Single-Stage-End-Suction-Centrifugal-Pumps4

    HEAD : 40 to 290 FT.
    CAPACITY : To 4000 USGPM
    FEATURES : Oversized 316SS shaft to minimize deflection and vibrations for optimal mechanical seal life; positive bearing locking; Oversized bearings to handle both axial and radial loads; Volute cover and bearing housing designed as “Back Pull-Out” assembly for ease of servicing;Generous oil capacity for positive lubrication of the submerged bearings;Magnetic plug to trap metallic impurities from the oil; Corrosion allowance in excess of 3mm; High hydraulic efficiency and low NRSH requiredments; Safety, durability, lower operating NPSH requirements; Safety, durability, lower operating costs; Optional cooling water jacket design.
    SHAFT SEALING : Crane 502 carbon/ SiCar/ Viton single mechanical sealstandard, Other available, inculuding double seals,
    OPTION : Bareshaft – Directly coupled to electric motor mounted on baseplate.
    TEMPERATURE LIMITS : GS $ RA: Min, -20’C; Max. 280’C (Except for water) A3,HC & DU; Min. -40’C; Max. 280’C (Except for water

    MAX DISCHARGE PRESS : 232 PSI (16 bar) to 248’F (120’C) 170 PSI (11 bar) to 536’F(280’C
    FLANGES : UNI 2223-2229 Drilled to ANSI B1 6.5 (Class 150))


  • Single-Stage-End-Suction-Centrifugal-Pumps4

    HEAD : 30 to 180 FT.
    CAPACITY : To 6550 USGPM
    FEATURES : Oversized 316SS shaft to minimize deflection and vibrations for optimal mechanical seal life; positive bearing locking; Oversized bearings to handle both axial and radial loads; Volute cover and bearing housing designed as “Back Pull-Out” assembly for ease of servicing;Generous oil capacity for positive lubrication of the submerged bearings;Magnetic plug to trap metallic impurities from the oil; Corrosion allowance in excess of 3mm; High hydraulic efficiency and low NRSH requiredments; Safety, durability, lower operating NPSH requirements; Safety, durability, lower operating costs; Optional cooling water jacket design.
    SHAFT SEALING : Crane 502 carbon/ SiCar/ Viton single mechanical sealstandard, Other available, inculuding double seals,
    OPTION : Bareshaft – Directly coupled to electric motor mounted on baseplate.
    TEMPERATURE LIMITS : GS $ RA: Min, -20’C; Max. 280’C (Except for water) A3,HC & DU; Min. -40’C; Max. 280’C (Except for water

    MAX DISCHARGE PRESS : 232 PSI (16 bar) to 248’F (120’C) 170 PSI (11 bar) to 536’F(280’C
    FLANGES : UNI 2223-2229 Drilled to ANSI B1 6.5 (Class 150))