Customer Feedback
All seems to be running well, no problems. Replacement pump was needed, we had it in 2 days. Repaired our pump in 1 week. Fast service, fast problem solving, great customer service
A. Giuliani
Home/Products/Pemo Pumps/Pemo Sludge And Slurry Pumps

Pemo Sludge And Slurry Pumps


Press Feed Pumps are specifically designed for  this application and there is little  direct competition in this market  due to the wide variety of models  developed for this purpose.

  • The main advantage of the Pemo sludge and slurry pumps is the Side Suction on the Horizontal Design. The seal in this design only sees the feed pressure of the feed slurry instead of the high pressure from the discharge of the pump. This allows simple mechanical seal flushing systems to be used. The seal flush system is sealed so no water or sludge will leak during the flush cycle.
  • Pemo Filter Press Feed pumps are designed specifically for abrasive and/or corrosive applications using a variety of materials such as rubber lining, Hardalloy PEMO (750-800 HB), Stainless Steel or Hastelloy.
  • Capacities of slurry pump when filling the filter press can reach 6613 GPM (1500 m3/h).
  • Final Pressure can exceed 294 psi (20 bar) for the Triple Stage and for some Double Stage Models, creating a much drier cake than single stage pumps can provide.
  • Mechanical Seals are all Silica Carbide or Tungsten Carbide.
  • The bearings for sludge pumps are all specifically designed for filter press applications and are oil lubricated.
  • Lubrication of the 2 mechanical seals can be done by use of clean water at 30 psi minimum pressure. It can also be done by use of glicole in a closed pressurized system.
  • Some PEMO sludge and slurry pumps can also be provided in Submersible or Vertical versions.
Model Capacity USGPM Max.Head-Feet Max.Pressure Bar Spec. Sheet Performance Curve   1750/3550 RPM Drawings
302 AO/ABM  88 131 5 arrww 2015-10-01_09292015-10-01_0929 2015-10-01_0929_001
403 AO / AB-B3  225  164 6 arrww  2015-10-01_09292015-10-01_0929 2015-10-01_0929_001
503 AO / AB-B3  264  164 6 arrww  2015-10-01_09292015-10-01_0929  2015-10-01_0929_001
603 AO / AB-B55 440 196 7.75 arrww 2015-10-01_09292015-10-01_0929 2015-10-01_0929_001
K125 AO / AB-B75  793  246 10 arrww 2015-10-01_09292015-10-01_0929  2015-10-01_0929_001
1004 AO / AB-B75  1102 164  6 arrww 2015-10-01_09292015-10-01_0929  2015-10-01_0929_001
P200 AO / AB-B10 2469 164 6 arrww  2015-10-01_09292015-10-01_0929 2015-10-01_0929_001
I-270 AO / AB-B10 3968 164 6 arrww 2015-10-01_09292015-10-01_0929 2015-10-01_0929_001
C300 AO / AB-B10 3968 164 6 arrww 2015-10-01_09292015-10-01_0929 2015-10-01_0929_001